SYNCHRONIZATION OF THE TIME INTERVALS IN THE COMMUNICATION CHANNEL WITH MULTIPATH SPREADING OF SIGNALS
Authors:
1.
Institute of Radio Electronics and Information Security, Sevastopol State University
2.
Institute of Radio Electronics and Information Security, Sevastopol State University
Type:
Article
Pages:
from 197
to 206
Status:
Published
Received:
20.06.2018
Accepted:
25.06.2018
Published:
25.06.2018
Subject area:
UDK 62 Инженерное дело. Техника в целом
Language:
Russian
Keywords:
quasi-orthogonal functions, orthogonal weight, impulse characteristic, synchronization
Abstract (English):
It is shown that the need for synchronization in frequency and time of the transmitter and receiver data transmission system with orthogonal signals is caused by signal representation by trigonometric Fourier series. It is suggested to transmit data by means of the signals, which are obtained as a result of displacement of the impulse response of the channel-forming equipment at multiple intervals. The algorithm, which allows determining the time delay of the required signal relative to the reference oscillation, is considered. The block diagram of the synchronization device, that implements the algorithm, has been worked out. The method of determining the arrival time of useful and reflected signals to the receiver input, which used to reduce the influence of multipath propagation of the signal on the synchronization device, has been worked out.
It is shown that the need for synchronization in frequency and time of the transmitter and receiver data transmission system with orthogonal signals is caused by signal representation by trigonometric Fourier series. It is suggested to transmit data by means of the signals, which are obtained as a result of displacement of the impulse response of the channel-forming equipment at multiple intervals. The algorithm, which allows determining the time delay of the required signal relative to the reference oscillation, is considered. The block diagram of the synchronization device, that implements the algorithm, has been worked out. The method of determining the arrival time of useful and reflected signals to the receiver input, which used to reduce the influence of multipath propagation of the signal on the synchronization device, has been worked out.
Keywords:
quasi-orthogonal functions, orthogonal weight, impulse characteristic, synchronization
quasi-orthogonal functions, orthogonal weight, impulse characteristic, synchronization
1. Degtyarev A. N. Ortogonalizaciya funkciy i povyshenie pomehoustoychivosti vysokoskorostnyh sistem peredachi informacii. M. : Infra-M, 2015. 152 s.
